add a given extension field for the standard extensions tag
The value parameter becomes the contents of the octet string associated
with the extension.
PKIFailureInfo ::= BIT STRING {
badAlg (0),
-- unrecognized or unsupported Algorithm Identifier
badMessageCheck (1), -- integrity check failed (e.g., signature did not verify)
badRequest (2),
-- transaction not permitted or supported
badTime (3), -- messageTime was not sufficiently close to the system time, as defined by local policy
badCertId (4), -- no certificate could be found matching the provided criteria
badDataFormat (5),
-- the data submitted has the wrong format
wrongAuthority (6), -- the authority indicated in the request is different from the one creating the response token
incorrectData (7), -- the requester's data is incorrect (for notary services)
missingTimeStamp (8), -- when the timestamp is missing but should be there (by policy)
badPOP (9) -- the proof-of-possession failed
certRevoked (10),
certConfirmed (11),
wrongIntegrity (12),
badRecipientNonce (13),
timeNotAvailable (14),
-- the TSA's time source is not available
unacceptedPolicy (15),
-- the requested TSA policy is not supported by the TSA
unacceptedExtension (16),
-- the requested extension is not supported by the TSA
addInfoNotAvailable (17)
-- the additional information requested could not be understood
-- or is not available
badSenderNonce (18),
badCertTemplate (19),
signerNotTrusted (20),
transactionIdInUse (21),
unsupportedVersion (22),
notAuthorized (23),
systemUnavail (24),
systemFailure (25),
-- the request cannot be handled due to system failure
duplicateCertReq (26)
CAKeyUpdAnnContent ::= SEQUENCE {
oldWithNew CMPCertificate, -- old pub signed with new priv
newWithOld CMPCertificate, -- new pub signed with old priv
newWithNew CMPCertificate -- new pub signed with new priv
}
CertResponse ::= SEQUENCE {
certReqId INTEGER,
-- to match this response with corresponding request (a value
-- of -1 is to be used if certReqId is not specified in the
-- corresponding request)
status PKIStatusInfo,
certifiedKeyPair CertifiedKeyPair OPTIONAL,
rspInfo OCTET STRING OPTIONAL
-- analogous to the id-regInfo-utf8Pairs string defined
-- for regInfo in CertReqMsg [CRMF]
}
CertStatus ::= SEQUENCE {
certHash OCTET STRING,
-- the hash of the certificate, using the same hash algorithm
-- as is used to create and verify the certificate signature
certReqId INTEGER,
-- to match this confirmation with the corresponding req/rep
statusInfo PKIStatusInfo OPTIONAL
}
Challenge ::= SEQUENCE {
owf AlgorithmIdentifier OPTIONAL,
-- MUST be present in the first Challenge; MAY be omitted in
-- any subsequent Challenge in POPODecKeyChallContent (if
-- omitted, then the owf used in the immediately preceding
-- Challenge is to be used).
OOBCertHash ::= SEQUENCE {
hashAlg [0] AlgorithmIdentifier OPTIONAL,
certId [1] CertId OPTIONAL,
hashVal BIT STRING
-- hashVal is calculated over the DER encoding of the
-- self-signed certificate with the identifier certID.
}
PBMParameter ::= SEQUENCE {
salt OCTET STRING,
-- note: implementations MAY wish to limit acceptable sizes
-- of this string to values appropriate for their environment
-- in order to reduce the risk of denial-of-service attacks
owf AlgorithmIdentifier,
-- AlgId for a One-Way Function (SHA-1 recommended)
iterationCount INTEGER,
-- number of times the OWF is applied
-- note: implementations MAY wish to limit acceptable sizes
-- of this integer to values appropriate for their environment
-- in order to reduce the risk of denial-of-service attacks
mac AlgorithmIdentifier
-- the MAC AlgId (e.g., DES-MAC, Triple-DES-MAC [PKCS11],
} -- or HMAC [RFC2104, RFC2202])
PKIHeader ::= SEQUENCE {
pvno INTEGER { cmp1999(1), cmp2000(2) },
sender GeneralName,
-- identifies the sender
recipient GeneralName,
-- identifies the intended recipient
messageTime [0] GeneralizedTime OPTIONAL,
-- time of production of this message (used when sender
-- believes that the transport will be "suitable"; i.e.,
-- that the time will still be meaningful upon receipt)
protectionAlg [1] AlgorithmIdentifier OPTIONAL,
-- algorithm used for calculation of protection bits
senderKID [2] KeyIdentifier OPTIONAL,
recipKID [3] KeyIdentifier OPTIONAL,
-- to identify specific keys used for protection
transactionID [4] OCTET STRING OPTIONAL,
-- identifies the transaction; i.e., this will be the same in
-- corresponding request, response, certConf, and PKIConf
-- messages
senderNonce [5] OCTET STRING OPTIONAL,
recipNonce [6] OCTET STRING OPTIONAL,
-- nonces used to provide replay protection, senderNonce
-- is inserted by the creator of this message; recipNonce
-- is a nonce previously inserted in a related message by
-- the intended recipient of this message
freeText [7] PKIFreeText OPTIONAL,
-- this may be used to indicate context-specific instructions
-- (this field is intended for human consumption)
generalInfo [8] SEQUENCE SIZE (1..MAX) OF
InfoTypeAndValue OPTIONAL
-- this may be used to convey context-specific information
-- (this field not primarily intended for human consumption)
}
PKIStatusInfo ::= SEQUENCE {
status PKIStatus, (INTEGER)
statusString PKIFreeText OPTIONAL,
failInfo PKIFailureInfo OPTIONAL (BIT STRING)
}
PKIStatus:
granted (0), -- you got exactly what you asked for
grantedWithMods (1), -- you got something like what you asked for
rejection (2), -- you don't get it, more information elsewhere in the message
waiting (3), -- the request body part has not yet been processed, expect to hear more later
revocationWarning (4), -- this message contains a warning that a revocation is imminent
revocationNotification (5), -- notification that a revocation has occurred
keyUpdateWarning (6) -- update already done for the oldCertId specified in CertReqMsg
PKIFailureInfo:
badAlg (0), -- unrecognized or unsupported Algorithm Identifier
badMessageCheck (1), -- integrity check failed (e.g., signature did not verify)
badRequest (2), -- transaction not permitted or supported
badTime (3), -- messageTime was not sufficiently close to the system time, as defined by local policy
badCertId (4), -- no certificate could be found matching the provided criteria
badDataFormat (5), -- the data submitted has the wrong format
wrongAuthority (6), -- the authority indicated in the request is different from the one creating the response token
incorrectData (7), -- the requester's data is incorrect (for notary services)
missingTimeStamp (8), -- when the timestamp is missing but should be there (by policy)
badPOP (9) -- the proof-of-possession failed
RevDetails ::= SEQUENCE {
certDetails CertTemplate,
-- allows requester to specify as much as they can about
-- the cert. for which revocation is requested
-- (e.g., for cases in which serialNumber is not available)
crlEntryDetails Extensions OPTIONAL
-- requested crlEntryExtensions
}
RevRepContent ::= SEQUENCE {
status SEQUENCE SIZE (1..MAX) OF PKIStatusInfo,
-- in same order as was sent in RevReqContent
revCerts [0] SEQUENCE SIZE (1..MAX) OF CertId OPTIONAL,
-- IDs for which revocation was requested
-- (same order as status)
crls [1] SEQUENCE SIZE (1..MAX) OF CertificateList OPTIONAL
-- the resulting CRLs (there may be more than one)
}
EncryptedValue ::= SEQUENCE {
intendedAlg [0] AlgorithmIdentifier OPTIONAL,
-- the intended algorithm for which the value will be used
symmAlg [1] AlgorithmIdentifier OPTIONAL,
-- the symmetric algorithm used to encrypt the value
encSymmKey [2] BIT STRING OPTIONAL,
-- the (encrypted) symmetric key used to encrypt the value
keyAlg [3] AlgorithmIdentifier OPTIONAL,
-- algorithm used to encrypt the symmetric key
valueHint [4] OCTET STRING OPTIONAL,
-- a brief description or identifier of the encValue content
-- (may be meaningful only to the sending entity, and used only
-- if EncryptedValue might be re-examined by the sending entity
-- in the future)
encValue BIT STRING }
-- the encrypted value itself
PKIPublicationInfo ::= SEQUENCE {
action INTEGER {
dontPublish (0),
pleasePublish (1) },
pubInfos SEQUENCE SIZE (1..MAX) OF SinglePubInfo OPTIONAL }
-- pubInfos MUST NOT be present if action is "dontPublish"
-- (if action is "pleasePublish" and pubInfos is omitted,
-- "dontCare" is assumed)
POPOPrivKey ::= CHOICE {
thisMessage [0] BIT STRING, -- Deprecated
-- possession is proven in this message (which contains the private
-- key itself (encrypted for the CA))
subsequentMessage [1] SubsequentMessage,
-- possession will be proven in a subsequent message
dhMAC [2] BIT STRING, -- Deprecated
agreeMAC [3] PKMACValue,
encryptedKey [4] EnvelopedData }
POPOSigningKey ::= SEQUENCE {
poposkInput [0] POPOSigningKeyInput OPTIONAL,
algorithmIdentifier AlgorithmIdentifier,
signature BIT STRING }
-- The signature (using "algorithmIdentifier") is on the
-- DER-encoded value of poposkInput.
POPOSigningKeyInput ::= SEQUENCE {
authInfo CHOICE {
sender [0] GeneralName,
-- used only if an authenticated identity has been
-- established for the sender (e.g., a DN from a
-- previously-issued and currently-valid certificate
publicKeyMAC PKMACValue },
-- used if no authenticated GeneralName currently exists for
-- the sender; publicKeyMAC contains a password-based MAC
-- on the DER-encoded value of publicKey
publicKey SubjectPublicKeyInfo } -- from CertTemplate
ProofOfPossession ::= CHOICE {
raVerified [0] NULL,
-- used if the RA has already verified that the requester is in
-- possession of the private key
signature [1] POPOSigningKey,
keyEncipherment [2] POPOPrivKey,
keyAgreement [3] POPOPrivKey }
TimeStampReq ::= SEQUENCE {
version INTEGER { v1(1) },
messageImprint MessageImprint,
--a hash algorithm OID and the hash value of the data to be
--time-stamped
reqPolicy TSAPolicyId OPTIONAL,
nonce INTEGER OPTIONAL,
certReq BOOLEAN DEFAULT FALSE,
extensions [0] IMPLICIT Extensions OPTIONAL
}
TSTInfo ::= SEQUENCE {
version INTEGER { v1(1) },
policy TSAPolicyId,
messageImprint MessageImprint,
-- MUST have the same value as the similar field in
-- TimeStampReq
serialNumber INTEGER,
-- Time-Stamping users MUST be ready to accommodate integers
-- up to 160 bits.
Validate the timestamp request, checking the digest to see if it is of an
accepted type and whether it is of the correct length for the algorithm specified.